Home » Withdrawal Sleeve
Withdrawal Sleeves
Withdrawal Sleeves
AH, AHX adapt themselves to the shaft diameter, while wider diameter tolerances can also be permitted than for the seat of a bearing with a cylindrical bore. Used to fix bearings with a tapered bore on supported shafts(lean). With Withdrawal Sleeve the shaft must have a thread so the nut can move the sleeve against the bearing. Lock Nuts or end plates are not supplied with withdrawal sleeves. KM Lock Nuts or HM Lock Nuts with appropriate locking devices are suitable, but must be ordered separately.
Suffixes Since 1997, there have been withdrawal sleeves with the suffix G. The G indicates a change of thread size. With withdrawal sleeves and adapter sleeves having different thread sizes, attempts have been made to standardize them. These standardization efforts are inspired by a desire to reduce nut variation.
Search Box (All Fields Optional)
PRODUCTS | BORE ID | THREAD TH | LENGTH TL | QUANTITY | QUOTE REQUEST |
---|---|---|---|---|---|
AH 2238 G WITHDRAWAL SLEEVES
|
|
|
|||
AH 224 WITHDRAWAL SLEEVES
|
|
|
|||
AH 2240 WITHDRAWAL SLEEVES
|
|
|
|||
AH 2244 WITHDRAWAL SLEEVES
|
|
|
|||
AH 2248 WITHDRAWAL SLEEVES
|
|
|
|||
AH 2252 WITHDRAWAL SLEEVES
|
|
|
|||
AH 2252 G WITHDRAWAL SLEEVES
|
|
|
|||
AH 2256 WITHDRAWAL SLEEVES
|
|
|
|||
AH 2256 G WITHDRAWAL SLEEVES
|
|
|
|||
AH 226 WITHDRAWAL SLEEVES
|
|
|
|||
AH 2260 WITHDRAWAL SLEEVES
|
|
|
|||
AH 2260 G WITHDRAWAL SLEEVES
|
|
|
|||
AH 2264 WITHDRAWAL SLEEVES
|
|
|
|||
AH 2264 G WITHDRAWAL SLEEVES
|
|
|
|||
AH 228 WITHDRAWAL SLEEVES
|
|
|
|||
AH 230 WITHDRAWAL SLEEVES
|
|
|
|||
AH 2308 WITHDRAWAL SLEEVES
|
|
|
|||
AH 2308 WITHDRAWAL SLEEVES
|
|
|
|||
AH 2309 WITHDRAWAL SLEEVES
|
|
|
|||
AH 2309 WITHDRAWAL SLEEVES
|
|
|
Download PDF
All Browse List