50+ years of experience A. Nairson Industries(India)
Withdrawal Sleeves
AH, AHX adapt themselves to the shaft diameter, while wider diameter tolerances can also be permitted than for the seat of a bearing with a cylindrical bore. Used to fix bearings with a tapered bore on supported shafts(lean). With Withdrawal Sleeve the shaft must have a thread so the nut can move the sleeve against the bearing. Lock Nuts or end plates are not supplied with withdrawal sleeves. KM Lock Nuts or HM Lock Nuts with appropriate locking devices are suitable, but must be ordered separately.

Suffixes Since 1997, there have been withdrawal sleeves with the suffix G. The G indicates a change of thread size. With withdrawal sleeves and adapter sleeves having different thread sizes, attempts have been made to standardize them. These standardization efforts are inspired by a desire to reduce nut variation.

Withdrawal Sleeves | KT King Tiger | Ktsleeves | Kingtiger Sleeves
Reset

PRODUCTS BORE ID THREAD TH LENGTH TL QUANTITY QUOTE REQUEST
AH 208 WITHDRAWAL SLEEVES
AH 209 WITHDRAWAL SLEEVES
AH 210 WITHDRAWAL SLEEVES
AH 211 WITHDRAWAL SLEEVES
AH 212 WITHDRAWAL SLEEVES
AH 213 WITHDRAWAL SLEEVES
AH 213 G WITHDRAWAL SLEEVES
AH 214 WITHDRAWAL SLEEVES
AH 214 G WITHDRAWAL SLEEVES
AH 215 WITHDRAWAL SLEEVES
AH 215 G WITHDRAWAL SLEEVES
AH 216 WITHDRAWAL SLEEVES
AH 217 WITHDRAWAL SLEEVES
AH 218 WITHDRAWAL SLEEVES
AH 219 WITHDRAWAL SLEEVES
AH 220 WITHDRAWAL SLEEVES
AH 222 WITHDRAWAL SLEEVES
AH 2236 WITHDRAWAL SLEEVES
AH 2236 G WITHDRAWAL SLEEVES
AH 2238 WITHDRAWAL SLEEVES
1 2 3 4 23
Download PDF All Browse List
For enquiries, get in touch with our experts!
Contact us

    Our Products Catalouge

    Your Name

    Your Email

    Your Number

    X